Consumable

Consumable		Main Unit		Finisher	Saddle Unit
Consumable		Ink cartridge	Maintenance box	Staple Cartridge	Staple Cartridge
Target of replacement		User replaceable	User replaceable	User replaceable	User replaceable
Counting method		Software control	Software control	Optical Sensor	Optical Sensor
Life	Near-end	4% remaining ink (Software control)	Free capacity 7% (software counted)	None	None
Life	End	0% ink remaining (Mechanical detection)	Free capacity 0% (mechanical detection)	30 remaining needles	10 remaining needles
Replacement count		Yes	Yes	None	None
Error display		When “Near-end” and “End” detected	When “Near-end” and “End” detected	When “End” detected	When “End” detected
Life end clear method		Install a new I/C.	Install a new I/C.	Install a new I/C.	Install a new I/C.
Operation when life ends		Stop printing (normal error)	Stop printing (normal error)	Continue printing (Staple function cannot be used)	Continue printing (Staple function cannot be used)
Remarks		Displays Near-end/End on the panel when the remaining ink of the second BK ink cartridge becomes low.	-	No stapling is performed after end detection. *The remaining needles has been moved to the cartridge holder side, so it will be consumed when you replace it with a new cartridge. However, if the end is detected during print job, the blank stapling operation will continue for the part that has been fed, and stops with an error.

# Consumable