Connector Cover ID:911

  1. Pull the lever to open the Right Door Unit (A).
  2. Pull the lever to open the main unit paper feed cover (A).

  3. Remove the C1 cassette (A).

    Assembly / 組み立て

    The corresponding cassette can be replaced with another cassette.
    In that case, follow the steps below.

    1. Loosen the two screws on the dial (A) and align the groove on the bearing (B) with the dowel on the dial (A).
    2. Replace the label (A) on the cassette.
  4. Raise the cover (A).
  5. Remove 1 screw and remove the Connector Cover (B).
    • : 3x8D