SDL Bi-Fold Eject Jam (Feed delay)

SDL output sensor does not turn ON even after the specified time has passed after the half-folding operation has started.

Step	Confirmation and action	YES	NO
1	Check the Paper transport parts Is the Paper transport parts installed properly? Are the paper transport parts dirty or deformed?	Reinstall the paper transport assembly Replace if not repaired	Go to step 2
2	SDL Ejection Paper SensorCheck the connection of the connector Is the SDL paper ejection sensor properly connected?	Go to step 3	reconnect SDL paper ejection sensor
3	SDL Ejection Paper SensorOperation Check Is the SDL paper ejection sensor operating normally in the diagnostics menu?	Go to step 4	replace SDL paper ejection sensor
4	Confirmation of connector connection of SDL Folding Blade Drive Motor Is the SDL Folding Blade drive motor connected properly?	Go to step 5	Reconnect the SDL Folding Blade Drive Motor
5	Operation check of SDL Folding Blade Drive Motor Is the SDL Folding Blade drive motor operating normally in the diagnostics menu?	Go to step 6	Replace SDL Folding Blade Drive Motor
6	Replace SDL Unit Main Board Have you reconnected and repaired the connector on the SDL unit main board?	Go to step 7	Replace the SDL Unit Main Board
7	Replacing floor finisher main board Have you reconnected and repaired the connector on the floor finisher main board?	End	Replace floor finisher main board

# SDL Bi-Fold Eject Jam (Feed delay)