FIN Paper Transport Jam (Feed delay)
Error code
- 101 FIN Paper Transport Jam (Feed delay)
Occurrence condition
- The FIN / IN FIN Transport sensor does not turn ON even after the specified time has passed since the sensor on the machine body turned ON.
Assumed cause
- Rollers, guides, etc. are dirty, deformed, or not installed properly
- FIN / IN FIN Paper Transport Sensor dirty, missing or defective
- FIN / IN FIN Paper Transport Sensor dirty, missing or defective
- Floor Finisher/ Inner Finisher main board failure
Related parts
- FIN/ IN FIN Paper Transport Sensor
- FIN/ IN FIN Paper Transport Motor
- Floor Finisher/ Inner Finisher main board failure
Troubleshooting
Step |
Confirmation and action |
YES |
NO |
|---|---|---|---|
| 1 | Check the Paper transport parts Is the Paper transport parts installed properly? Are the paper transport parts dirty or deformed? |
Reinstall the paper transport assembly Replace if not repaired |
Go to step 2 |
| 2 | Confirmation of FIN/ IN FIN Paper Transport Sensor connector connection Are the FIN/ IN FIN Paper Transport Sensor connected properly? |
Go to step 3 | Reconnect FIN/ IN FIN Paper Transport Sensor |
| 3 | Operation check of FIN/ IN FIN Paper Transport Sensor Is the FIN/ IN FIN Paper Transport Sensor operating normally in the diagnostics menu? |
Go to step 4 | Replace FIN/ IN FIN Paper Transport Sensor |
| 4 | Confirmation of FIN/ IN FIN Paper Transport Motor connector connection Are the FIN/ IN FIN Paper Transport Motor connected properly? |
Go to step 5 | Reconnect FIN/ IN FIN Paper Transport Motor |
| 5 | Operation check of FIN/ IN FIN Paper Transport Motor Is the FIN/ IN FIN Paper Transport Motor operating normally in the diagnostics menu? |
Go to step 6 | Replace FIN/ IN FIN Paper Transport Motor |
| 6 | Replace Floor Finisher/ Inner Finisher main board Have you reconnected and repaired the connector on the Floor Finisher/ Inner Finisher main board? |
End | Replace Floor Finisher/ Inner Finisher main board |