Precautions if the authentication device is to be built into the product
If the authentication device is to be built into the front decorative cover upper (C), the authentication label must be affixed to the front decorative cover upper (C) .
 Caution / 注意 |
- The authentication label (B) must be affixed directly above the authentication device without interfering with the panel (A).
The following shows a guide for the placement of the label.
- Depending on the position of the authentication label, the authentication device may not respond well.
- After the authentication device is to be built into the front decorative cover upper (C), be sure to check that it is working properly.
|
