BLM HP detection error
Error code
- 034217 BLM HP detection error
Occurrence condition
- The home position for belt maintenance cannot be detected during the initialization operation.
Assumed cause
- Failure of the Belt Maintenance Drive Motor
- Failure of the Belt Maintenance HP Sensor
- Failure of the belt maintenance mechanism
Related parts
- Belt Maintenance Drive Motor
- Belt Maintenance HP Sensor
- Belt Drawer Unit
Troubleshooting
Step |
Confirmation and action |
YES |
NO |
|---|---|---|---|
1 |
Check harness connection Are the connectors of the harnesses connecting to the components for belt maintenance properly connected? |
Go to step 2 | Connect the connectors properly. |
2 |
Replace the Belt Maintenance Drive Motor and the Belt Maintenance HP Sensor Is the error no longer occurring? |
End | Go to step 3 |
3 |
Replace the Belt Drawer Unit (replace the gear trains of the belt maintenance mechanism) Is the error no longer occurring? |
End | Contact Epson local service representatives. |