NVT Initial Mode Value Check ID Error

Error code:

  • 031480 NVT Initial Mode Check ID Error 0
  • 031481 NVT Initial Mode Check ID Error 1
  • 031482 NVT Initial Mode Check ID Error 2
  • 031483 NVT Initial Mode Check ID Error 3
  • 031484 NVT Initial Mode Check ID Error 4
  • 031485 NVT Initial Mode Check ID Error 5
Occurrence condition
  • The check ID that the main unit checks when reading the NVT initial mode value in head replacement does not match.
Assumed cause
  • Noise occurred when reading memory information or communication failed.
  • Head memory has failed.
  • FFC is disconnected.
Related parts
  • Print head
  • Head FFC
Troubleshooting
Step Confirmation and action YES NO
1

Check the connection status of the Head FFC

  • Is the FFC board / head side connector disconnected, half-inserted, etc.?
 Go to step 2 Re-connect the connector.
2

Check the status of the Head FFC

  • Are there any scratches or breaks in the cable?
 Go to step 3

Replace the FFC cable.
3

Replace the Print head

  • Does the error still occurs?

Contact EPSON Local Service Representatives

 End