3010202 Sensor
| Program No. | Menu Name | Judgment method | Remarks |
|---|---|---|---|
| --- | All motor stop | --- | Stops running motors all at once. |
| 301020201 | Whole Drive Motor Drive Detection | Check by turning on [301020101 Whole Drive Motor (Full Speed)] or [301020102 Whole Drive Motor (Low Speed)]. | TRUE: No Detection FALSE: Detection Default：TRUE |
| 301020202 | Paper Tray HP Sensor | Open and close the Right Door Unit. | |
| 301020203 | Paper Tray Paper Sensor | Set the paper in the Paper tray. | |
| 301020204 | Paper Tray Post-Pickup Sensor | Feed the paper set in the Paper tray into the mecha. | TRUE: Detection FALSE: No Detection Default：FALSE |
| 301020205 | C1 Paper Feed Sensor | Shield the sensor from light with paper, etc. | |
| 301020206 | C1 Cassette Sensor | Remove and insert the C1 cassette. | TRUE: No Cassette FALSE: With Cassette Default：FALSE |
| 301020207 | C1 Paper Sensor | Set the paper in the C1 Cassette. | TRUE: No Paper FALSE: With Paper Default：TRUE |
| 301020208 | C1 Paper Near-End Sensor | Set 50 or more sheets of paper in the C1 cassette and check the near-end is not detected. | TRUE: Near-end Detection FALSE: No Detection Default：FALSE |
| 301020209 | C1 Lift Up Motor Control Sensor | Remove and insert the C1 cassette. | TRUE: Detection FALSE: No Detection Default：FALSE |
| 301020210 | C1 Lift Up Upper Limit Sensor | ||
| 301020211 | C2 Paper Feed Sensor | Shield the sensor from light with paper, etc. | TRUE: Detection FALSE: No Detection Default：FALSE |
| 301020212 | C2 Cassette Sensor | Remove and insert the C2 cassette. | TRUE: No Cassette FALSE: With Cassette Default：FALSE |
| 301020213 | C2 Paper Sensor | Set the paper in the C2 Cassette. | TRUE: No Paper FALSE: With Paper Default：TRUE |
| 301020214 | C2 Paper Near-End Sensor | Set 50 or more sheets of paper in the C2 cassette and check the near-end is not detected. | TRUE: Near-end Detection FALSE: No Detection Default：FALSE |
| 301020215 | C2 Lift Up Motor Control Sensor | Remove and insert the C2 cassette. | TRUE: Detection FALSE: No Detection Default：FALSE |
| 301020216 | C2 Lift Up Upper Limit Sensor | ||
| 301020217 | Pre-Registration Sensor | Insert the paper into the sensor parts. | |
| 301020218 | PW Sensor |
|
TRUE: No Detection FALSE: Detection Default：TRUE Be careful not to cause a paper jam, as sensor detection will be interrupted if a paper jam occurs. |
| 301020219 | PW Carriage HP Sensor | Execute [301020119 PW Carriage Drive Motor (CW)] to move the PW carriage and check. | TRUE: Detection the HP FALSE: No HP Detection Default：TRUE |