FIN Stapler Jam

Error code

115 FIN Stapler Jam

Floor Finisher

Occurrence condition

The home position of the FIN stapler cannot be detected even 600ms after the FIN stapler drive motor starts (however, this detection is not performed for 100ms when the motor starts).

Assumed cause

Staple Jam
Reassembly of the FIN Stapler Drive Motor
FIN Stapler Unit dirty, falling off, or malfunctioning
FIN Stapler paper feed board failure
Floor Finisher main board failure

Related parts

FIN Stapler Cartridge
FIN Stapler Drive Motor
FIN Stapler Unit
FIN Stapler paper feed board
Floor Finisher main board failure

Troubleshooting

Step	Confirmation and action	YES	NO
1	Staple confirmation Are staples jammed?	remove jammed staples from staple cartridge	Go to step 2
2	Check of FIN Stapler Drive Motor Can the FIN Stapler Drive Motor rotate manually?	Go to step 3	Replace the FIN Stapler Unit.
3	Check of connector connection of FIN Stapler Unit Are the FIN Stapler Unit properly connected?	Go to step 4	Reconnect the FIN Stapler Unit.
4	Operation check of FIN Stapler Unit Is the FIN Stapler Unit operating normally in the diagnostics menu?	Go to step 5	Replace the FIN Stapler Unit.
5	Replace FIN Stapler paper feed board Replaced the FIN Stapler paper feed board, did the phenomenon improve?	End	Go to step 6
6	Replacing floor finisher main board Replaced the floor finisher main board, did the phenomenon improve?	End	Contact Epson local service representatives.

Inner Finisher

Occurrence condition

The home position of the FIN stapler cannot be detected even 600ms after the FIN stapler drive motor starts .

Assumed cause

Staple Jam
Reassembly of the IN FIN Stapler Drive Motor
IN FIN Stapler Unit dirty, falling off, or malfunctioning
IN FIN Stapler paper feed board failure
Replacing the inner finisher main board

Related parts

IN FIN Stapler Cartridge
IN FIN Stapler Drive Motor
IN FIN Stapler Unit
IN FIN Stapler paper feed board failure
IN Finisher main board failure

Troubleshooting

Step	Confirmation and action	YES	NO
1	Staple confirmation Are staples jammed?	remove jammed staples from staple cartridge	Go to step 2
2	Check of IN FIN Stapler Drive Motor Can the IN FIN Stapler Drive Motor rotate manually?	Go to step 3	Replace the IN FIN Stapler Unit.
3	Checking the IN FIN Stapler Unit connector connection Are the IN FIN Stapler Unit properly connected?	Go to step 4	Reconnect the IN FIN Stapler Unit.
4	Operation check of IN FIN Stapler Unit Is the IN FIN Stapler Drive Motor operating normally in the diagnostics menu?	Go to step 5	Replace the IN FIN Stapler Unit.
5	Replace IN FIN Stapler paper feed board failure Replaced the FIN Stapler paper feed board, did the phenomenon improve?	End	Go to step 6
6	Replacing the inner finisher main board Replaced the inner finisher main board and did the problem improve?	End	Contact Epson local service representatives.