Paper Edge Misalignment (Irregular Misalignment)


Assumed cause
  • When using the inner finisher, if the paper curled and high coefficient of friction between papers, the pulling force of the paddle is insufficient and irregular misalignment occurs.


    (This tends to occur during high-Duty duplex printing.)


Troubleshooting
Step Confirmation and action YES NO
1

Check the condition of the paper loaded in the tray.

If the paper is wavy, curled, or otherwise in poor condition, replace it with paper taken out of a newly opened pack or stored in a humidity-controlled storage.

  • Has the defect been improved?
 End of work Go to step 2
2

Turn on the Finisher Finishing Improvement Menu.

Set the Finisher Finishing Improvement (User Mode > General Settings > Printer Settings > Finisher Finishing Improvement) to ON.


Note / 補足
  • Has the defect been improved?
 End of work Contact Epson local service representatives.