Connector Cover

  1. Remove the 4 screws and remove the right cover sub (A).
    • : 3x10DW
  2. Pull the lever to open the Right Door Unit (A).

  3. Follow the steps below to remove the connector cover (A).

    1.Release the dowel.
    2. Slide in the direction of the red arrow.
    3. Slide in the direction of the blue arrow to release the hook.

    Caution / 注意

    Do not close the Right door unit (D1) with the belt holder removed and the belt unit lowered from its normal position.
    The right door may not open. In this case, it is necessary to remove the Right door unit form the main unit.
    Assembly / 組み立て

    Insert the 3 hooks of the connector cover (A) into the positioning holes on the main unit.