Error codes related to Fax transmission |
Job’s error code |
Remedy |
| No tone |
Failure 203 |
- Plug in the phone and check for a dial tone, continuous tone, or intermittent tone from the switch.
- PSTN or PBX line? For a PBX line, change the connection line setting to PBX and try.
- If you can hear the dial tone but cannot detect it, record it and check the signal.
Adjust the detection method in RAM Edit mode.
The setting of dial tone detection = off should be avoided as much as possible, since there is a risk of erroneous connection.
|
| Port reverse insertion |
Failure 204 |
- Check that the LINE and EXT. Ports are not connected in reverse, and that the telephone line is connected.
|
| Line not connected |
Failure 205 |
- Check that the telephone line is correctly connected to the LINE port.
- Connect your phone, hear a dial tone and see if you can dial and place a call.
- Check the line voltage with a tester. (DC48V when on-hook)
|
| Busy |
Failure 206 |
- Check that the phone number is correct.
- Check if another signal is incorrectly detected as a busy tone.
If a false detection has been made, record the signal and check for the false detection.
Turn off the busy tone detection function or adjust the detection method in RAM Edit mode.
|
| no reply |
Failure 207 |
- Check that the phone number is correct.
- Check if the fax signal is returned from the other party.
|
