SDL Paper Feed Retention Jam

When transferring to the SDL unit, the FIN Wait Drum sensor does not turn off even after the specified time has passed since the FIN Wait Drum sensor turned on.

Step	Confirmation and action	YES	NO
1	Check the Paper transport parts Is the Paper transport parts installed properly? Are the paper transport parts dirty or deformed?	Reinstall the paper transport assembly Replace if not repaired	Go to step 2
2	FIN Wait Drum Sensor connector connection check Are the FIN Wait Drum Sensor connected properly?	Go to step 3	reconnect FIN Wait Drum Sensor
3	Operation check of FIN Wait Drum Sensor Is the FIN Wait Drum Sensor operating normally in the diagnostics menu?	Go to step 4	replace FIN Wait Drum Sensor
4	FIN Wait Drum Motor connector connection confirmation Are the FIN Wait Drum Motor connected properly?	Go to step 5	reconnect FIN Wait Drum Motor
5	FIN Wait Drum Motor operation check Is the FIN Wait Drum Motor operating normally in the diagnostics menu?	Go to step 6	Replace FIN Wait Drum Motor
6	SDL Paper Transport MotorCheck the connection of the connector Are the SDL Paper Transport Motor connected properly?	Go to step 7	reconnect SDL Paper Transport Motor
7	SDL Paper Transport MotorOperation Check Is the SDL Paper Transport Motor operating normally in the diagnostics menu?	Go to step 8	Replace SDL Paper Transport Motor
8	Replacing floor finisher main board Have you reconnected and repaired the connector on the floor finisher main board?	End	Replace floor finisher main board

# SDL Paper Feed Retention Jam