SEL1 PID overload error

An abnormal load was suddenly applied to the motor, and the motor rotated in the opposite direction due to the reaction force.
+42V power is not supplied.
The load on the motor is greater than expected.

Step	Confirmation and action	YES	NO
1	Check harness connection Is the harness connecting to the Selector Unit properly connected?	Go to step 2	Reconnect the harness.
2	Replace the suspected part Replace the Selector Unit. Does the error still occur?	Go to step 3	End
3	Replace the suspected part Replace the Mechanical Controller Board. Does the error still occur?	Go to step 4	End
4	Replace the suspected part Replace the Main Board. Does the error still occur?	Contact Epson local service representatives.	End

# SEL1 PID reverse error / SEL1 PID lock error / SEL1 PID overload error