FIN Alignment Paddle Jam
Error code
- 116 FIN Alignment Paddle Jam
Floor Finisher
Occurrence condition
- After the FIN SDL drive motor starts, the FIN Alignment Paddle HP Sensor ON cannot be detected even after 1s.
Assumed cause
- paper jam
- Reassembly of the FIN Mid Drive Motor
- FIN Alignment Paddle HP Sensor dirty, missing or defective
- Floor Finisher main board failure
Related parts
- FIN Mid Drive Motor
- FIN Alignment Paddle HP Sensor
- Floor Finisher main board failure
Troubleshooting
Step |
Confirmation and action |
YES |
NO |
|---|---|---|---|
| 1 | paper removal Is paper jammed in the FIN Paper Guide? |
Remove paper |
Go to step 2 |
| 2 | Confirmation of drive of FIN Mid Drive Motor Can the FIN Middle Roller Drive Motor rotate smoothly manually? |
Go to step 3 | Replace FIN Mid Drive Motor |
| 3 | FIN Alignment Paddle HP Sensor connector connection check Are the SDL Alignment Paddle HP Sensor connected properly? |
Go to step 4 | Reconnect SDL Alignment Paddle HP Sensor |
| 4 | Operation check of FIN Alignment Paddle HP Sensor Is the FIN Alignment Paddle HP Sensor operating normally in the diagnostics menu? |
Go to step 5 | Replace FIN Alignment Paddle HP Sensor |
| 5 | Confirmation of FIN Mid Drive Motor connector connection Are the FIN Mid Drive Motor connected properly? |
Go to step 6 | Replace FIN Mid Drive Motor |
| 6 | Operation check of FIN Mid Drive Motor Is the FIN Mid Drive Motor operating normally in the diagnostics menu? |
Go to step 7 | Replace FIN Mid Drive Motor |
| 7 | Replacing floor finisher main board Have you reconnected and repaired the connector on the floor finisher main board? |
End | Replace floor finisher main board |
Inner Finisher
Occurrence condition
After the IN FIN Mid Drive Motor starts, the FIN Alignment Paddle HP Sensor ON cannot be detected even after 1s.
Assumed cause
- paper jam
- Reassembly of the IN FIN Mid Drive Motor
- IN FIN Alignment Paddle HP Sensor dirty, missing or defective
- Inner Finisher main board failure
Related parts
- IN FIN Middle Roller Drive Motor
- IN FIN Alignment Paddle HP Sensor
- Inner Finisher Main Board
Troubleshooting
Step |
Confirmation and action |
YES |
NO |
|---|---|---|---|
| 1 | paper removal Is paper jammed in the IN FIN Paper Guide? |
Remove paper |
Go to step 2 |
| 2 | Driving confirmation of IN FIN Mid Drive Motor Can the IN FIN Middle Roller Drive Motor rotate smoothly manually? |
Go to step 3 | Replace IN FIN Middle Roller Drive Motor |
| 3 | Confirmation of IN FIN Alignment Paddle HP Sensor connector connection Are the IN FIN Alignment Paddle HP Sensor connected properly? |
Go to step 4 | Reconnect IN FIN Alignment Paddle HP Sensor |
| 4 | Operation check of IN FIN Alignment Paddle HP Sensor Is the IN FIN Alignment Paddle HP Sensor operating normally in the diagnostics menu? |
Go to step 5 | Replace IN FIN Alignment Paddle HP Sensor |
| 5 | Connector connection check of IN FIN Middle Drive Motor Are the IN FIN Mid Drive Motor connected properly? |
Go to step 6 | Reconnect IN FIN Middle Roller Drive Motor |
| 6 | Operation check of IN FIN Middle Drive Motor Is the IN FIN Mid Drive Motor operating normally in the diagnostics menu? |
Go to step 7 | Replace IN FIN Middle Roller Drive Motor |
| 7 | Replacing the inner finisher main board Have you reconnected and repaired the connector on the inner finisher main board? |
End | Replace Inner finisher main board |