FIN Paper Transport Jam
Error code
- 100 FIN Paper Transport Jam
Occurrence condition
- The ON state of the FIN / IN FIN Paper Transport sensor was detected before the paper was ejected from the machine.
Assumed cause
- There are foreign objects, pieces of paper, etc. in the paper transport path.
- FIN Paper Transport Sensor dirty, missing or defective
- IN FIN Paper Transport Sensor dirty, missing or defective
- Floor Finisher/ Inner Finisher main board failure
Related parts
- FIN Paper Transport Sensor
- IN FIN Paper Transport Sensor
- Floor Finisher/ Inner Finisher main board failure
Troubleshooting
Step |
Confirmation and action |
YES |
NO |
|---|---|---|---|
| 1 | Check paper transport path Is there any foreign matter, paper chips, etc. in the paper transport path? |
Remove any foreign objects or pieces of paper |
Go to step 2 |
| 2 | Clean FIN/ IN FIN Paper Transport Sensor FIN / IN FIN Is the Paper Transport Sensor dirty? |
Clean FIN/ IN FIN Paper Transport Sensor | Go to step 3 |
| 3 | Confirmation of FIN/ IN FIN Paper Transport Sensor connector connection Are the FIN/ IN FIN Paper Transport Sensor connected properly? |
Go to step 4 | Reconnect FIN/ IN FIN Paper Transport Sensor |
| 4 | Operation check of FIN/ IN FIN Paper Transport Sensor Is the FIN/ IN FIN Paper Transport Sensor operating normally in the diagnostics menu? |
Go to step 5 | Replace FIN/ IN FIN Paper Transport Sensor |
| 5 | Replace Floor Finisher/ Inner Finisher main board Have you reconnected and repaired the connector on the Floor Finisher/ Inner Finisher main board? |
End | Replace Floor Finisher/ Inner Finisher main board |