FIN Pulling Guide Motor Jam

Error code
  • 132 FIN Pulling Guide Motor Jam
Floor Finisher
Occurrence condition
  • The FIN Paper Pulling Paddle HP Sensor does not detect any changes even after the FIN Pulling Guide Motor moves in the direction of the HP sensor change for a certain period of time.
Assumed cause
  • FIN Pulling Guide dirty, deformed, or not fitted properly
  • FIN Pulling Paddle Release HP Sensor dirty, missing or defective
  • FIN Pulling Guide Motor dirty, missing or defective
  • Floor Finisher main board failure
Related parts
  • FIN Pulling Guide
  • FIN Paper Pulling Paddle HP Sensor
  • FIN Pulling Guide Motor
  • Floor Finisher main board failure
Troubleshooting

Step

Confirmation and action

YES

NO
1

Checking FIN Pulling Guide

Is the FIN Pulling Guide installed properly?

Or is it dirty, deformed or worn?

Clean the FIN Pulling Guide

Replace if not repaired

Go to step 2
2

FIN Paper Pulling Paddle HP SensorCheck the connection of the connector

Are the FIN Paper Pulling Paddle HP Sensor connected properly?

 Go to step 3 reconnect FIN Paper Pulling Paddle HP Sensor
3

FIN Paper Pulling Paddle HP SensorOperation Check

Is the FIN Paper Pulling Paddle HP Sensor operating normally in the diagnostics menu?

 Go to step 4 Replace FIN Paper Pulling Paddle HP Sensor
4

FIN Pulling Guide MotorCheck the connection of the connector

Are the FIN Pulling Guide Motor connected properly?

 Go to step 5 reconnect FIN Pulling Guide Motor
5

FIN Pulling Guide MotorOperation Check

Is the FIN Pulling Guide Motor operating normally in the diagnostics menu?

 Go to step 6 Replace FIN Pulling Guide Motor
6

Replacing floor finisher main board

Have you reconnected and repaired the connector on the floor finisher main board?

 End Replace floor finisher main board


Inner Finisher
Occurrence condition
  • Even if the IN FIN Pulling Paddle Motor is moved in the direction of HP sensor fluctuation for a certain period of time, the change of IN FIN Paper Pulling Paddle HP Sensor is not detected.
Assumed cause
  • IN FIN Pulling Paddle dirty, deformed, or not fitted properly
  • IN FIN Paper Pulling Paddle HP Sensor dirty, missing or defective
  • IN FIN Pulling Paddle Motor dirty, missing or defective
  • Inner Finisher main board failure
Related parts
  • IN FIN Pulling Paddle
  • FIN Paper Pulling Paddle HP Sensor
  • IN FIN Pulling Paddle Motor
  • Inner Finisher Main Board
Troubleshooting

Step

Confirmation and action

YES

NO
1

Checking IN FIN Pulling Paddle

Is the IN FIN Pulling Paddle installed properly?

Or is it dirty, deformed or worn?

Clean IN FIN Pulling Paddle

Replace if not repaired

Go to step 2
2

IN FIN Paper Pulling Paddle HP SensorCheck the connection of the connector

Are the IN FIN Pulling Paddle Release HP Sensor IN FIN Paper Pulling Paddle HP Sensor connected properly?

 Go to step 3 reconnect IN FIN Paper Pulling Paddle HP Sensor
3

IN FIN Paper Pulling Paddle HP SensorOperation Check

Is the IN FIN Paper Pulling Paddle HP Sensor operating normally in the diagnostics menu?

 Go to step 4 Replace IN FIN Paper Pulling Paddle HP Sensor
4

IN FIN Pulling Paddle MotorCheck the connection of the connector

Are the IN FIN Pulling Paddle Motor connected properly?

 Go to step 5 reconnect IN FIN Pulling Paddle Motor
5

IN FIN Pulling Paddle MotorOperation Check

Is the IN FIN Pulling Paddle Motor operating normally in the diagnostics menu?

 Go to step 6 Replace IN FIN Pulling Paddle Motor
6

Replacing the inner finisher main board

Have you reconnected and repaired the connector on the inner finisher main board?

 End Replace Inner finisher main board