FIN Stapler Drive Motor Error

Error code
  • 035014 FIN Stapler Drive Motor Error
Occurrence condition
  • 00115 FIN Stapler jam was detected twice in a row.
    (Second jam detection condition: The home position cannot be detected even after 600ms have passed since the FIN Stapler Drive Motor started)
Assumed cause
  • FIN Stapler Unit dirty, falling off, or malfunctioning
  • FIN Stapler Drive Motor dirty, missing or defective
  • FIN Stapler Sensor dirty, missing or defective
  • Floor Finisher main board failure
Related parts
  • FIN Stapler Unit
  • FIN Stapler Drive Motor
  • FIN Stapler Sensor
  • Floor Finisher Main Board
Troubleshooting
Step Confirmation and action YES NO
1

Check the FIN Stapler Unit

  • Is the FIN Stapler unit assembled correctly?
 Go to step 2 If the FIN Stapler Unit cannot be moved manually, fix the part where it is stuck.
2

Check the connection of the FIN Stapler Unit

[Part(s) to be checked]

  • FIN Stapler Drive Motor - Floor Finisher Main Board

[Confirmation details]

  • Are the connectors connected properly?
  • Are there any problems with the wires?
 Go to step 3

Improper connector connection

  • Clean the wire connector and reinsert it.

If the wire is abnormal

  • Replace the wire.
3

FIN Stapler Unitreplacement

  • Replaced the FIN Stapler Unit, did the problem improve?


 End Go to step 4
4

Replacing floor finisher main board

  • Replaced the floor finisher main board, did the phenomenon improve?
 End Contact Epson local service representatives.