IN FIN Stapler Drive Motor error 1

00115 FIN Stapler jam was detected twice in a row.
(Second jam detection condition: The home position cannot be detected even after 600 ms have passed since the IN FIN stapler drive motor started.)

Step	Confirmation and action	YES	NO
1	Check the IN FIN Stapler Unit Is the IN FIN Stapler unit assembled correctly?	Go to step 2	If the IN FIN Stapler Unit cannot be moved manually, fix the part where it is stuck.
2	Check the connection of the IN FIN Stapler Unit [Part(s) to be checked] IN FIN Stapler Drive Motor - Inner Finisher Main Board [Confirmation details] Are the connectors connected properly? Are there any problems with the wires?	Go to step 3	Improper connector connection Clean the wire connector and reinsert it. If the wire is abnormal Replace the wire.
3	Replace the IN FIN Stapler Unit Replaced the IN FIN Stapler Unit, did the problem improve?	End	Go to step 4
4	Replacing the inner finisher main board Replaced the inner finisher main board and did the problem improve?	End	Contact Epson local service representatives.

# IN FIN Stapler Drive Motor error 1