SDL Stapler Jam
Error code
- 127 SDL Stapler Jam
Occurrence condition
- After starting SDL Stapler Drive Motor, HP of SDL Stapler cannot be detected.
- A motor lock was detected while the SDL Stapler Drive Motor was running.
Assumed cause
- Staple Jam
- SDL Stapler unit dirty, falling off, or malfunctioning
- Failure of the SDL main board
- Floor Finisher main board failure
Related parts
- SDL Stapler Cartridge
- SDL Stapler Unit
- SDL main board
- Floor Finisher Main Board
Troubleshooting
Step |
Confirmation and action |
YES |
NO |
|---|---|---|---|
| 1 | Staple confirmation Are staples jammed? |
remove jammed staples from staple cartridge |
Go to step 2 |
| 2 | SDL Stapler Drive MotorChecking Can the SDL stapler drive motor rotate smoothly manually? |
Go to step 3 | Replace the SDL Stapler Unit. |
| 3 | SDL Stapler UnitCheck the connection of the connector Are the SDL Stapler Units properly connected? |
Go to step 4 | Reconnect the SDL Stapler Unit. |
| 4 | SDL Stapler UnitOperation Check Is the SDL Stapler Drive Motor operating normally in the diagnostics menu? |
Go to step 5 | Replace the SDL Stapler Unit. |
| 5 | Replacing the SDL main board Have you reconnected and repaired the connector on the SDL main board? |
Go to step 6 | Replace the SDL Main Board. |
| 6 | Replacing floor finisher main board Have you reconnected and repaired the connector on the floor finisher main board? |
End | Replace floor finisher main board |