# 107 INK Low Disp Change

1. Start special setting mode.（Special Setting Mode Starting Method）

2. Select [100 Installation mode: MENU] and select [RUN].

   Note / 補足

   Operate with the following buttons. [UP] button: Move the selected item (move up) [DOWN] button: Move the selected item (move down) [RUN] button: Execute the selected item

   

3. Select [107 INK Low Disp Change] and select [RUN].
   
4. Select the optimum setting value for the contract status and optional product configuration.

   
   

   Setting value	Overview
   DISP	Display the Ink remaining amount
   NON DISP	Not Display the Ink remaining amount
   NoChange	Do not change configuration