Head Memory related Fatal Errors (5)

Error code
  • 031013 Head memory writing error
  • 031014 Head BRS/XDS flash memory write error
  • 031015 Head NVT flash memory writing error
  • 031016 Head ID flash memory writing error
  • 031019 Head memory reading error
Occurrence condition
  • 031013 Communication failure when in writing main unit data to head memory before head replacement
  • 031014 Data verification mismatch when in writing BRS / XDS data to head memory, when replacing Head Unit
  • 031015 Data verification mismatch when in writing NVT result to head memory, when replacing Head Unit
  • 031016 Data verification mismatch when in writing head use history to head memory, when replacing Head Unit
  • 031019 Communication failure when in reading head data from head memory after Head Unit replacement
Assumed cause
  • Noise occurred when reading memory information or communication failed.
  • Head memory has failed.
  • FFC is disconnected.
Related parts
  • Head Unit
  • Head FFC
Troubleshooting
Step Confirmation and action YES NO
1

Check the connection status of the Head FFC

  • Is the FFC connector disconnected or half-inserted?
Go to step 2 Re-connect the connector.
2

Check the status of the Head FFC

  • Are there any scratches or breaks in the FFC?
Go to step 3

Replace the following parts.

  • Replace the faulty cable.
3

Replace the Head Unit

  • Does the error go away?

Contact EPSON Local Service Representatives

End