ADF PID overload error

Error code
  • 100005 ADF PID overload error
Occurrence condition
  • The load on the drive motor is too large to operate.
Assumed cause
  • The motor load exceeds the expected
Related parts

  • Gear trains

  • All Drive Motor

  • Board (Motor Driver)

  • Encoder Scale

  • Encoder Sensor

Troubleshooting

Step

Confirmation and action

YES

NO
1

Check for foreign substances

  • Check the ADF Unit for foreign objects.
    Remove foreign objects, if any.
    Does the error still occur?
 Go to step 2 End of work
2

Check harness connection

  • Check if the harness connecting the motor and encoder is properly connected.
    Reconnect the harness
    Does the error still occur?
 Go to step 3 End of work
3

Confirmation of rotating component part

  • Check the gear trains of the ADF Unit for disengagement, damage, or abnormalities.
    Reassemble the gear train components.
    Does the error still occur?
 Go to step 4 End of work
4

Check the encoder

  • Check the encoder scale and encoder sensor for dirt and abnormalities.
    Replace the encoder sensor or scale.
    Does the error still occur?
 Go to step 5 End of work
5

Replace the other parts or components

  • Replace the following parts in sequence and check whether the symptom recurs after each replacement.
    (1) ADF Board, (2) Motor, (3) ADF Unit
    Does the error still occur?
 Contact EPSON Local Service Representatives End of work