Tools and Jigs Used
The following tools and jigs are required for repair work on this machine.
Tool
| Tool name | Availability | Part code | Remarks |
|---|---|---|---|
| Phillips (+) screwdriver No.2 |
|
- | JIS B1012-1985 |
| Flathead (-) screwdriver #3 |
|
- | |
| Phillips (+) precision screwdriver No.0 |
|
- | |
| Flathead (-) precision screwdriver |
|
- | Head width: less than 0.8 mm |
| Phillips (+) stabilizer screwdriver |
|
- | Overall length: 47 mm or longer |
| Tweezers (round tip) |
|
- | |
| Radio pliers |
|
- |
“
“: Commercial products available
The tools with the part code information are available from Epson.
Jigs
| Jig | Availability | Part code | Remarks |
|---|---|---|---|
| ADF,CHART(J),A4-DS | - | 1874105 |
Adjustment pattern (A4) for ADF and Scanner |
| ADF,Chart (81),LTV-MTF | - | 1651125 |
ADF/SCN adjustment chart paper (LTV) |
| SEAL,JOINT,ASP,GLE | - | 1924999 | When replacing the head unit (preventing ink leakage from the ink supply port of the head). |
| PAD, BOTTOM,HEAD,ASP | - | 5168136 | When replacing the head unit (tray to put the removed head unit). |
| COVER,JOINT,PROTECTION,ME | - | - | When replacing the ink system unit (preventing ink leakage). *It is included in the ASP of the ink system unit. |
| CAP,DUCT,RELAY,ASSY,GLE | - | 1927155 | When replacing the ink system unit (preventing ink leakage from the ink system unit supply port). |
| COVER,PROTECTION,TUBE,CAP | - | - | When replacing the cap unit (preventing ink leakage from the cap unit after replacement). |