Life control

Information for the life of consumables and periodic replacement parts is shown below.
The parts or components listed below need to be replaced periodically.

Classification Name Target of replacement Counting method Threshold Replacement count Error display Life clear method Operation when life ends Re-display of life
Near-end End
Consumable Ink Pack User/Service personnel Software control 4% 0% Yes Near-end / end Replace with a new ink pack. Stops the printing (Normal error) ---
Maintenance Box 97% 100% Yes Replace the new Maintenance box.
Periodic Replacement Parts C1 cassette feed roller Pickup Roller Assy Service personnel Counting by paper feed operation 145,500 sheets 150,000 sheets Yes Panel operation (Reset counters of periodic replacement parts in Service support mode) Continues the printing (Select OK to cancel the error message.)
    • Redisplayed on the panel whenever the printer is turned on.
    • Redisplayed on the panel every time 300 sheets are fed using the corresponding cassette.
Retard Roller
Optional cassette feed roller* Paper Feed Roller 145,500 sheets 150,000 sheets Yes
Separation Roller
Retard Roller
Rear ASF Unit 48,500 sheets 50,000 sheets Yes

* : The Separation Roller Assy of the Optional Paper Cassette is the same as the Feed Roller of the Optional Paper Cassette.

Caution / 注意
  • Replace the Pickup Roller Assy in a set along with the Retard Roller of the Printer, and replace the Feed Roller of the Optional Paper Cassette in a set along with the Retard Roller and Separation Roller of the Optional Paper Cassette.
  • After replacing them, make sure to reset the counter for the parts using the service support mode.（Refer to Periodic Replacement Parts）