# B81 INK SUPPLY UNIT SEQ (ADJUSTMENT AFTER REPLACEMENT)

#Overview

Sequentially display the adjustments required after Ink Supply Unit replacement.

Caution / 注意

“Preparation Before Replacement (B91 Ink Supply Unit)” must be performed before Ink Supply Unit replacement because this adjustment is designed accordingly. Make sure to perform “Adjustment After Replacement (B81 Ink Supply Unit)” in the state that “Preparation Before Replacement (B91 Ink Supply Unit)” is performed before replacing the Ink Supply Unit.

#Work Procedure

1. Start the printer in the service mode.

   • Service mode startup

2. Select "B81 Ink Supply Unit Seq" refer to "How to select an Adjustment item".

   • HOW TO SELECT AN ADJUSTMENT ITEM

3. The inspections and ink filling are executed in the following sequence.

   1. Ink Leak Sensor (Ink leak check)

   2. Ink Fill (Initial Fill) (C01 HEAD INK FILL/C02 INITIAL FILL (INK FILL))