# B82 INK SYSTEM ASSY SEQ (ADJUSTMENT AFTER REPLACEMENT)

#Overview

Sequentially display the adjustments required after Inksystem Assy replacement.

Caution / 注意

“Preparation Before Replacement (Ink System Assy)” must be performed before Inksystem Assy replacement because this adjustment is designed accordingly. Make sure to perform “Adjustment After Replacement (Ink System Assy Seq)” in the state that “Preparation Before Replacement (Ink System Assy)” is performed before replacing the Inksystem Assy.

#Work Procedure

1. Start the printer in the service mode.

   • Service mode startup

2. Select "B82 Ink System Assy Seq" refer to "How to select an Adjustment item".

   • HOW TO SELECT AN ADJUSTMENT ITEM

3. The inspections and ink filling are executed in the following sequence.

   1. IS Motor Correct (MOTOR DISPERSION CORRECT)

   2. Ink Fill (Initial Fill) (C01 HEAD INK FILL/C02 INITIAL FILL (INK FILL))