# Overview

The individual action check is a mode to check whether the various motors, sensors, and other parts are operating normally so that service personnel can investigate the cause of an error on site when there is a service call, etc. and its purpose is to reduce the downtime for servicing on site.

With regard to electrical components such as motors, sensors, and solenoids, this function can operate each of them individually so it can be used to narrow down the cause of a failure

#HOW TO START THE INDIVIDUAL ACTION MODE

1. Start the printer in the service mode. (Service mode startup)

2. Select “Individual Action Check: MENU” from the service support mode menu.

3. Select check item from the “Individual Action Check” menu to perform the checks of the individual actions of the motors, sensors, and solenoids.