Outline of setting change in FAX Maintenance Mode

The following shows the procedure for settings change in FAX Maintenance Mode.

  1. Enter Fax Maintenance Mode.
  2. Start FAX Parameter Settings.
  3. Select the item to be changed, then input the value.
  4. Press the [Power] button to turn off the power.
important / 重要

  • Make sure not to change the parameter before identifying the phenomenon and cause of the trouble.

    Make sure to identify the phenomenon and cause of the trouble before changing the parameter. Otherwise, the essential trouble may be hidden that result in recurrence the trouble or cause of another problem.
    According to the explanation in Fax troubleshooting basics, perform in the following procedure.

    • Step1:  Check the symptom
    • Step2:  Identify the cause
    • Step3:  Correction
    When the identification of the cause is difficult, check the symptom as accurately as possible to acquire setting information of the product, then inquire at support center.

  • Initialize the FAX Service Parameter Setting


    When you want to initialize the FAX Service parameter only, [FAX Parameter Mode] → Select [FAX All Data Initial].