# Housing Right

1. Remove the four screws, then remove the Rear Cover (Back) (A).
   
   • : C.B.P-TITE-SCREW-3x10-F.ZN-3C

   Assembly / 組み立て

   Attach the two dowels of the Rear Cover (Back) (A) to the positioning holes on the Housing Left (B) and Housing Right (C).

2. Remove the two screws, then remove the Rear Top Cover (A).
   
   • : C.B.P-TITE-SCREW-3x10-F.ZN-3C
3. Disengage the hook, and remove the Maintenance Box Cover (A).
   
4. Open the ADF/SCN Unit (A).
   
5. Remove the four screws that secure the Housing Right (A).
   
   • : C.B.P-TITE-SCREW-3x10-F.ZN-3C
6. Lift the Housing Right to release the two hooks on the front side of the Housing Right, then remove the Housing Right.

   
   

   Assembly / 組み立て

   Insert the four tabs of the Housing Right (A) to the positioning holes on the Ink Supply Unit.