# B83 REAR ASF UNIT SEQ (ADJUSTMENT AFTER REPLACEMENT)

#Overview

Sequentially display the adjustments required after Rear ASF Assy replacement.

#Work Procedure

1. Start the printer in the service mode.

   • Service mode startup

2. Select “B83 Rear ASF Unit Seq” refer to “ How to select an Adjustment item”.

   • HOW TO SELECT AN ADJUSTMENT ITEM

3. The following adjustments are performed.

   1. Counter Reset (Rear ASF Counter) (B16 COUNTER RESET)

   2. Print Start Pos. (Rear ASF) (B49 PW SENSOR CORRECT/B50 PRINT START POS. (ASF)/B51 PRINT START POS. (REAR ASF))