Adjustments & Additional Operations

This product has adjustments and inspections that are performed by mechanically adjusting and inspecting the printer mechanisms (mechanical adjustments and inspections), and adjustments and inspections that are performed by using an adjustment program (software adjustments and inspections). The adjustment program is incorporated into the main unit of this product, and each adjustment menu can be used by starting the product in the service support mode. This section explains the adjustments, inspections, and maintenance required during repair work.

Adjustment/Inspection types

  • Mechanical adjustments and inspections
    Items to be physically adjusted and inspected on the product main unit.
  • Software adjustments and inspections (service support mode)
    • Before repair operation
      Perform the work for parts that require preparatory work prior to performing part replacement (repair work).
    • Main parts adjustment
    • Sequentially display the required adjustment items for part replacement. Only the five main parts (Printhead, Ink Supply Unit, Inksystem Assy, Rear ASF Assy, and Main Board Assy) are supported.
    • Individual adjustment mode
      Used to individually select and execute the adjustment items. Perform adjustment in this mode for parts other than the five main parts.
  • Maintenance (service support mode)
    Used to perform maintenance operations such as ink filling and cleaning.

List of Tools/Software/Consumables for Adjustments

Repair Parts Adjustment/Checks Items and Order

Adjustments and Check Items Purpose

Adjustments and Check Items Details