# INK FILL [HEAD INK FILL:C01][INITIAL FILL:C02]

1. Start service support mode.
   • Service mode startup and operating procedures
2. Select “Maintenance: MENU” from the service support mode top menu.
3. Select ink filling (Head Ink Fill or Initial Fill).
   

   Check Point / チェックポイント

   Select and execute the corresponding adjustment item using either procedure below.

   • Selecting by entering the program number
   1. Select “Input C No._Maintenance” from the Adjustment menu.
   2. Press the [#] button and software number key is displayed on LCD. Enter program number.
      Head Ink Fill: 01
      Initial Fill: 02
   3. Press the [#] button.
   • Selecting from menu
   1. Select “Ink Fill: MENU” from the maintenance menu.
   2. Select an item from the Ink Fill menu.
      • C01 Head Ink Fill
      • C02 Initial Fill
4. Press the [2] button to start ink filling.