Front Right Housing

  1. Open the Duplex Print Cover (A).
  2. Remove the two screws, then remove the Connector Cover (A).

    • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
  3. Remove the two screws, then remove the Right Housing Assy (A) toward the rear of the product.

    • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
  4. Remove the Stacker Assy (A).


  5. Remove the Cassette Assy (A).
  6. Open the Front Cover Assy (A).
  7. While pressing the two hooks of the hinge (A), remove the Front Cover Assy (A) frontward.
  8. Remove the three screws that secures the Front Right Housing (A).

    • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
  9. Disengage the two hooks, and remove the Front Right Housing (A).