# Initialization PW Sensor [B14]

1. Start service support mode.
   • Service mode startup and operating procedures
2. Select “Adjustment Main Unit: MENU” from the service support mode top menu.

3. Select Initialization PW Sensor

   Check Point / チェックポイント

   Select and execute the corresponding adjustment item using either procedure below.

   • Selecting by entering the program number
   1. Select “Input B No.-Main Unit Adjust” from the Adjustment menu.
   2. Press the [#] button and software number key is displayed on LCD. Enter programnumber “14”.
   3. Press the [#] button.
   • Selecting from menu
   1. Select “Individual Adjustment: MENU” from the Adjustment menu.
   2. Select “Initial Setting Menu” from the Individual Adjustment menu.
   3. Select “Initialize-PW Sensor” from the Initialize menu.
4. Initialization is executed.
5. The initialization end screen appears. Press the [#] button to return to the menu screen.