# INK DISCHARGE [HEAD INK DISCHARGE: C08][SUPPLY INK DISCHARGE: C09][INK SYSTEM INK DISCHARGE: C10]

1. Start service support mode.
   • Service mode startup and operating procedures
2. Select “Maintenance: MENU” from the service support mode top menu.

3. Select ink discharge (Head Ink Discharge or Supply Ink Discharge or Ink System Ink Discharge).

   Check Point / チェックポイント

   Select and execute the corresponding adjustment item using either procedure below.

   • Selecting by entering the program number
   1. Select “Input C No._Maintenance” from the Adjustment menu.
   2. Press the [#] button and software number key is displayed on LCD. Enter program number.
      Head Ink Discharge: 08
                       09
      Ink System Ink Discharge: 10
   3. Press the [#] button.
   • Selecting from menu
   1. Select “Ink Discharge: MENU” from the maintenance menu.
   2. Select the part to discharge ink.
      • C08 Head Ink Discharge
      • C09 Supply Ink Discharge
      • C10 Ink System Ink Discharge