# MOTOR CORRECT [B40][B41][B42][B66][B67][B68]

Check Point / チェックポイント

Before executing ASF/LIFT motor dispersion correction, the paper cassettes must be removed.

1. Start service support mode.
   • Service mode startup and operating procedures
2. Select “Adjustment Main Unit: MENU” from the service support mode top menu.

3. Select the motor to correct.

   Check Point / チェックポイント

   Select and execute the corresponding adjustment item using either procedure below.

   • Selecting by entering the program number
   1. Select “Input B No.-Main Unit Adjust” from the Adjustment menu.
   2. Press the [#] button and software number key is displayed on LCD. Enter the program No. of the motor to correct.
      • CR Motor Correction 40
      • PF Motor Correction 41
      • ASF Motor Correction C1 42
      • ASF/Lift Motor Correction C2 66
      • ASF/Lift Motor Correction C3 67
      • ASF/Lift Motor Correction C4 68
   3. Press the [#] button.
   • Selecting from menu
   1. Select “Individual Adjustment: MENU” from the Adjustment menu.
   2. Select “Mech Adjust: MENU” from the Individual Adjustment menu.
   3. Select the motor to correct from the Mech Check menu.
      • B40 CR Motor Correction
      • B41 PF Motor Correction
      • B42 ASF Motor Correction C1
      • B66 ASF/Lift Motor Correction C2
      • B67 ASF/Lift Motor Correction C3
      • B68 ASF/Lift Motor Correction C4
4. The correction and motor cycle check results are displayed after correction ends.