SRPT PID Lock Error (Error code: 000664)
Cause
State in which load of SRPT motor exceeds expected load
State in which load of motor exceeds expected load, and motor does not rotate at all
Suspected cause
A foreign object entered the SRPT drive mechanism
Standard paper output tray failure
Damage to or foreign object trapped in SRPT gear train parts
SRPT phase sensor failure
SRPT motor failure
Main Board failure
Troubleshooting
Step |
Confirmation and action |
Yes |
No |
|---|---|---|---|
| 1 | Check the Main Eject Tray Check for any foreign objects in the extension trigger on the standard paper output tray. |
Go to step 2 | Remove the foreign object |
| 2 | Check the Main Eject Tray Is the standard paper output tray working normally? Is the tray behaving normally with the extension trigger? |
Go to step 3 |
Replace the Main Eject Tray EJECT TRAY MOTOR/SENSOR [B72]
|
| 3 | Check the SRPT gear train parts Check the SRPT gear train parts to make sure that there is no foreign object on or damage to them. |
Replace the main board (If the problem persists, contact Epson local service representatives) |
Reassemble the SRPT gear train parts. |