# HEAD THERMISTOR CHECK [C11]

1. Start service support mode.
   • Service mode startup and operating procedures
2. Select “Maintenance: MENU” from the service support mode top menu.

3. Select “Head Thermistor Check”.

   Check Point / チェックポイント

   Select and execute the corresponding adjustment item using either procedure below.

   • Selecting by entering the program number
   1. Select “Input C No._Maintenance” from the Adjustment menu.
   2. Press the [#] button and software number key is displayed on LCD. Enter programnumber “11”.
   3. Press the [#] button.
   • Selecting from menu
   1. Select “Ink Discharge: MENU” from the maintenance menu.
   2. Select “Head Thermistor Check” from the Ink Discharge menu.
4. The Print Head temperature is displayed.