Paper Cassette 2nd Assy

Check Point / チェックポイント

Follow the procedure below to disassemble and reassemble the cassettes C2 to C4.
Adjustment / 調整

Run one of the adjustment menus according to the cassette to be replaced.

(If you ran the Before-replacement menu before replacing the part, it will start automatically when you turn the power on.)

  1. Pull out the Paper Cassette 2nd Assy (A), then remove the Paper Cassette 2nd Assy (A) from the Optional Paper Cassette (B).

Adjustment / 調整

After replacing this part, you need to run the menu from the service support mode.

(If you ran the Before-replacement menu before replacing the part, it will start automatically when you turn the power on.)