# Housing Right

1. Remove the Rear Unit (A) in the direction of the arrow while pressing the buttons inward.
   
2. Open the ASF Cover (A) and remove the two screws securing the Rear Housing Assy (B).
   
   
   • : C.B.P-TITE-SCREW-3x10-F.ZB-3C
3. Remove the four screws that secure the Rear Back Cover (A).
   
   
   • : C.B.P-TITE-SCREW-3x10-F.ZN-3C
4. Remove the Rear Back Cover (A) downward.

   
   

   Assembly / 組み立て

   Attach the two dowels of the Rear Back Cover (A) to the positioning holes on the Housing Left (B) and the Housing Right (C).

5. Remove the Rear Upper Cover Assy (A) in the direction of the arrow.

   
   

   Assembly / 組み立て

   Insert the four tabs of the Rear Upper Cover Assy (A) to the positioning holes of the Housing ASF (B).

6. Remove the two screws securing the Housing ASF (A).
   
   
   • : C.B.P-TITE-SCREW-3x10-F.ZN-3C
7. Open the Printer Cover (A) and remove the four screws, and then remove the Housing ASF (B).
   
   • : C.B.P-TITE-SCREW-3x10-F.ZN-3C
8. Remove the Printer Cover (A) upward.
   
9. Disengage the hook, and remove the Maintenance Box Cover (A).
   
10. Remove the three screws that secure the Housing Right (A).
    
    
    • : C.B.P-TITE-SCREW-3x10-F.ZN-3C
11. Remove the two screws that secure the Housing Right (A).
    
    
    • : C.B.P-TITE-SCREW-3x10-F.ZN-3C
12. Lift the Housing Right (A) to release the two hooks on the front side of the Housing Right (A), then remove the Housing Right (A).
    
    

    Assembly / 組み立て

    Insert the four tabs of the Housing Right (A) to the positioning holes on the Ink Supply Unit (B).