IS load position reverse error (error code: 000113)

Cause
  • State in which load of IS motor exceeds expected load
  • When rotated in the opposite direction to rotation direction
    (There was a sudden load error, and the motor rotated in the opposite direction in reaction to it)
  • State in which load of motor exceeds expected load, and motor does not rotate at all
Suspected cause
  • Foreign object remaining
  • Inksystem gear train part damaged
  • IS encoder failure
  • IS motor failure
  • Main Board Assy failure
Troubleshooting
Step Check and measure Yes No
1

Check the state of the Inksystem gear train parts
Check the following in the Inksystem gear train parts.

  • Is there anything such as a foreign object impeding the operation?
  • Are the Inksystem gear train parts damaged?

Is the result OK?

 Go to step 2
  • If any foreign object exists
    Remove the foreign object or jammed paper.
  • When damaged
    Replace the Inksystem Assy.
2

Perform IS motor operation check 1
Turn on the power and check the IS motor operation. Did the IS motor operate (rotate)?

Go to step 3

Replace the Inksystem Assy.
3

Perform IS motor operation check 2
Is the IS motor operating normally?

Replace the Main Board Assy.
(If the trouble is not resolved after replacing the Main Board Assy, inquire at Epson Service Support department.)

Replace the Inksystem Assy.