# Front Inner Housing Left

1. Remove the three screws, then remove the Left Housing Assy (A) toward the rear of the product.
   
   
   • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
2. Remove the Stacker Assy (A).
   
   
   
3. Remove the Cassette Assy (A).
   
4. Open the Front Cover Assy (A).
   
5. While pressing the two hooks of the hinge (A), remove the Front Cover Assy (A) frontward.
   
6. Remove the three screws fastening the Front Left Housing (A).
   
   
   • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
7. Release the hook and remove the Front Left Housing (A).
   
8. Remove the Front Cover Hinge Left (B) from the Dowel on the Front Inner Housing Left (A).
   
9. Open the ADF Unit.
   
10. Release the hook by inserting a narrow-tipped object, such as tweezers or the like, as shown above, and remove the two SCN Housing Caps (A).
    
11. Remove the two screws.
    
    
    • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
12. Open the Panel Unit (A).
    
13. Remove the three screws.
    
    
    • : C.B.S-TITE-SCREW-3x8-F.ZN-3C

    Check Point / チェックポイント

    The three screws fastening the Front SC Cover are mounted facing downward, so it is possible to remove the screws from below the Panel Unit.

14. Open the Front Cover Assy (A).
    
15. Release the two hooks and remove the Front SC Cover (A).
    
16. Remove the four screws, then remove the Front Inner Housing Center (A) frontward.
    
    
    • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
17. Remove the two screws fastening the Front Inner Housing Left (A).
    
    
    • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
18. Remove the Front Inner Housing Left (C) while releasing the place interfering (A) with the ADF/SCN Unit (A).