# Stacker Driven Assy

1. Remove the three screws, then remove the Left Housing Assy (A) toward the rear of the product.
   
   
   • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
2. Remove the Stacker Assy (A).
   
   
   
3. Remove the Cassette Assy (A).
   
4. Open the Front Cover Assy (A).
   
5. While pressing the two hooks of the hinge (A), remove the Front Cover Assy (A) frontward.
   
6. Remove the three screws fastening the Front Left Housing (A).
   
   
   • : C.B.S-TITE-SCREW-3x8-F.ZN-3C
7. Release the hook and remove the Front Left Housing (A).
   
8. Remove the cable from the relay connector (A).
   
9. Release the SRPT Motor Phase Detection Sensor Cable (B) and the SRPT Cam Phase Detection Sensor Cable (C) from the clamp (A).
   
10. Release the SRPT Motor Phase Detection Sensor Cable (A) from the hook, and remove it from the connector of the SRPT Motor Phase Detection Sensor (B).
    
11. Release the SRPT Cam Phase Detection Sensor Cable (A) from the four hooks, and remove it from the connector of the SRPT Cam Phase Detection Sensor (B).
    
12. Remove the three screws, and remove the Stacker Driven Assy (A).
    
    
    • : C.B.S-TITE-SCREW-3x8-F.ZN-3C