HEAD THERMISTOR CHECK [C11]

  1. Start the service support mode. (Service mode startup and operating procedures)
  2. Select “Maintenance: MENU” from the service support mode top menu.

  3. Select “Head Thermistor Check”.

    Check Point / チェックポイント

    Select and execute the corresponding adjustment item using either procedure below.

    • Selecting by entering the program number

    1. Select “Input C No._Maintenance” from the Adjustment menu.
    2. Press the [#] button and software number key is displayed on LCD. Enter program number “11”.
    3. Press the [#] button.

    • Selecting from menu

    1. Select “Ink Discharge: MENU” from the maintenance menu.
    2. Select “Head Thermistor Check” from the Ink Discharge menu.
  4. The Print Head temperature is displayed.