CR PID underspeed error (error code: 000025)

Cause
  • When lower than the expected speed is detected

  • Initial operation of the CR Unit cannot be performed normally due to improper assembling of failure of the unit or dirt.

Suspected cause
  • Paper jam paper remaining
  • Foreign object remaining
Troubleshooting
Step Confirmation and action Yes No
1

Check for paper jam paper remaining and foreign object
There is no paper jam paper and foreign object in the CR scanning section.

Go to step 2

Remove the paper jam paper
2

Check for foreign object
There is no foreign object in the CR scanning section.

Check dirt and assembly of the following parts

 Remove the foreign object