Mechanical Adjustments and Inspections
Adjustment name |
Program No. | Purpose | Adjustment / inspection paper / Feed Tray |
Adjustment procedure overview | Tools | Reference | |
|---|---|---|---|---|---|---|---|
| Adjustment | PG Adjustment |
--- | Set the clearance of the gap between the nozzle surface of the print head and the platen to an appropriate amount. | --- | Place a thickness gauge in the specified location and then move the carriage unit over the thickness gauge and check the clearance. |
|
PG Adjustment |
| Inspection | Leak Check | --- | To prevent ink leaks, make sure there is no ink leaking from the joints of the print head and ink supply unit ink tubes. |
--- | When the ink supply unit ink tubes are attached to the print head, insert the leak check jig and determine whether or not there is a leak by whether or not ink adheres to it. |
--- | Ink leak check |