# Setting the DNS server

1. Switching the DNS server setting method

   1. If the DNS server is set to [Auto], tap [Auto].
      

   2. Check that DNS server is [Manual].
      

2. Setting the primary DNS
   1. Tap the IP address of the primary DNS.
      

   2. The software keyboard appears. Enter the IP address based on the hearing sheet.
      

   3. When input is complete, tap [OK].
      

   4. Check that the entered IP address has been set as the primary DNS.
      

3. Setting the secondary DNS
   1. Tap the IP address of the secondary DNS.
      

   2. The software keyboard appears. Enter the IP address based on the hearing sheet.
      

   3. When input is complete, tap [OK].
      

   4. Check that the secondary DNS setting has changed.
      

4. Saving the settings
   1. Tap [Start Setup].
      
   2. Wait until the settings are reflected.
      
   3. Check that the Setup Complete screen is displayed.