# MOTOR CORRECT [B40][B41][B42][B66][B67][B68]

Check Point / チェックポイント

Before executing ASF/LIFT motor dispersion correction, the paper cassettes must be removed.

1. Start the service support mode. (Service mode startup and operating procedures)
2. Select “Adjustment Main Unit: MENU” from the service support mode top menu.

3. Select the motor to correct.

   Check Point / チェックポイント

   Select and execute the corresponding adjustment item using either procedure below.

   • Selecting by entering the program number

   1. Select “Input B No.-Main Unit Adjust” from the Adjustment menu.
   2. Press the [#] button and software number key is displayed on LCD. Enter the program No. of the motor to correct.
      CR Motor Correction 40
      PF Motor Correction 41
      ASF Motor Correction C1 42
      ASF/Lift Motor Correction C2 66
      ASF/Lift Motor Correction C3 67
      ASF/Lift Motor Correction C4 68
   3. Press the [#] button.

   • Selecting from menu

   1. Select “Individual Adjustment: MENU” from the Adjustment menu.
   2. Select “Mech Adjust: MENU” from the Individual Adjustment menu.
   3. Select the motor to correct from the Mech Check menu.
      • B40 CR Motor Correction
      • B41 PF Motor Correction
      • B42 ASF Motor Correction C1
      • B66 ASF/Lift Motor Correction C2
      • B67 ASF/Lift Motor Correction C3
      • B68 ASF/Lift Motor Correction C4
4. The correction and motor cycle check results are displayed after correction ends.