Maintenance
| Adjustment name | Program No. |
Purpose | Adjustment / inspection paper / Feed Tray |
Adjustment procedure overview | Tools | ||
|---|---|---|---|---|---|---|---|
| Maintenance functions | Head Ink Fill |
C01 | Fill the print head and ink channels with ink to enable printing.(Perform this after print head replacement.) | --- | Select “Head Ink Fill” from the service support mode menu and execute the item to check the discharge state with the nozzle check patterns. | --- | |
| Initial Ink Filling | C02 | Fill the print head and ink channels with ink to enable printing.(Perform this after replacement of the ink supply path parts between the Ink Pack Tray unit and print head.) | --- | Select “Head Ink Fill” from the service support mode menu and execute the item to check the discharge state with the nozzle check patterns. | --- | ||
| CL1 | C03 | Perform this to recover from missing dots or print defects of the print head. |
--- |
Select a head cleaning item from the service support mode menu and execute the item to check the discharge state with the nozzle check patterns. |
--- |
||
| CL2 | C04 | ||||||
| CL3 | C05 | ||||||
| Strong CL | C06 | ||||||
| Ink Replacement | C07 | ||||||
| Head Ink Discharge | C08 | Discharge ink to release the pressure applied to the ink inside the supply path from the head for the purpose of preventing ink leaks after print head replacement and ink supply unit. | --- | Select “Head Ink Discharge” from the service support mode menu and execute the item. | --- | ||
| Supply Ink Discharge | C09 | Discharge the ink inside the supply path from the ink supply unit to the print head and replace it with air. *It is necessary to remove the ink pack before execution. | --- | Select “Supply Ink Discharge” from the service support mode menu and execute the item. | --- | ||
| Ink System Ink Discharge | C10 | Discharge the waste ink remaining in the suction pump (ink system). | --- | Select “Ink System Ink Discharge” from the service support mode menu and execute the item. | --- | ||
| Head Thermistor Check | C11 | Check the temperature of the Print Head. | --- | Select “Head Thermistor Check” from the service support mode menu and execute the item. | --- | ||